Bolt and Strap Hinge6″ Bolt for 1/2″ Pintle System / 6″ Strap for 1/2″ Pintle System

• Note: The sizes listed as the pintle diameter” (for example 3/4″ pintle) are nominal dimensions, meaning they do not measure exactly that dimension. Use our nominal dimension to match up our straps with our bolts, etc. when you are ordering our products. If you order one of our products to match a pintle diameter of something that you already own, you do so at your own risk.
• The bolt and strap for this hinge are separate components. Please make sure to select the appropriate and matching size for each. The pintle sizes available for these components are 1/2″, 5/8″, 3/4″ and 7/8″.
• The upright pintle is part of our pintle system of gate hinges.
• The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated at 200 lbs.
• One hinge consists of one strap and one bolt. You would normally order two of each to hang one gate or door.
• The straps are normally installed using carriage bolts (not included).
• Two washers and two nuts are included with each bolt ordered.

6″ Bolt for 1/2″ Pintle (SKU 504820)

• 100 lb per hinge weight rating,
• 4-5/8″ maximum post size

8″ Bolt for 5/8″ Pintle (SKU 504821)

• 150 lb per hinge weight rating
• 6-1/2″ maximum post size

12″ Bolt for 5/8″ Pintle (SKU 504822)

• 150 lb per hinge weight rating
• 10-1/4″ maximum post size

10″ Bolt for 3/4″ Pintle (SKU 504823)

• 200 lb per hinge weight rating
• 7-7/8″ maximum post size

12″ Bolt for 3/4″ Pintle (SKU 504824)

• 200 lb per hinge weight rating
• 10″ maximum post size

B10094