Half Cranked Hinge for Back-to-Back Overlay Cabinets – Bundle

• European style hinge with titanium plating over steel base material.
• This plating provides a nice aesthetic while offering superior corrosion resistance.
• Half cranked clip top model for back-to-back doors.
• Can also be used on non-back-to-back cabinets which have a smaller overlay than is allowed with the straight arm hinge.
• Please see the “Reveal & Overlay Information” document below to verify if this bundle will work for your application.

Installation

• Hinge cup installs in a 35mm (1-3/8″) diameter cup drilled in the back of the door
• Cup depth needs to be a minimum of 11 mm deep (7/16″).
• This hinge and mounting plate will accommodate any overlay from 7mm (9/32″) to 14mm (9/16″).
• The hinge comes with screws and plastic dowels preattached. Dowels are typically used in MDF or particle board materials.If installing in solid wood, the dowels can be discarded and the included wood screws can be used in their place.

What’s Included

• 1 Half Cranked Hinge
• 1 2mm Frameless Mounting Plate
• Four #6 x 5/8″Flat Head Wood Screws

Available for purchase separately:

• Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
• 35mm Forstner Bit, for new installations (SKU 204000)
• Ecodrill, installation jig, for new installations (SKU 701000)

C10625