Blum Blumotion 155 Degree Hinge For 3/8″ Partial Inset Cabinets – Bundle

• Blum Blumotion 155 degree hinge bundle for 3/8″ partial inset cabinets.
• Blumotion is Blum’s built-in soft close feature which adds a silent and effortless door closing action.
• For frameless type cabinets.
• This setup can be used on face frame type cabinets only by blocking out behind the frame. This is when a block of wood (not included) is installed to the cabinet side wall to be flush with the face frame. This essentially simulates a frameless type cabinet where the hinges are mounted.
• To view an example of this, see the document found under Downloads titled “Blocking Out a Face Frame”.
• Note: with all installations of this hinge, trial applications are highly advised as unforeseen variables often exist.

What’s Included:

• 1 Blum Blumotion 155 Degree Half-Cranked Hinge
• 1 Blum 3mm Frameless Mounting Plate
• Four #6 screws for the hinge and mounting plate

Available for purchase separately:

• Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
• Restriction clip. Limits angle of opening to 92 or 110 degrees.
  • 92 degree option is our SKU 268774
  • 110 degree option is our SKU 268772
• Blum Touch Latch for Self-Closing Doors (SKU 268822)
• 35mm Forstner Bit, for new installations (SKU 204000)
• Ecodrill, installation jig, for new installations (SKU 701000)

B10103